NTAG 213 ON METAL NFC STICKER - WITH VARIABLE ID - 29 MM ROUND
29 mm on-metal NFC tag with an NXP NTAG213 chip, supplied with a unique ID code printed on the visible face and encoded in the chip. Built for inventory, traceability and maintenance of metal assets.
- A different ID on every tag
- Works on metal surfaces
- Minimum order: 10 units
- Custom product: production and delivery in 20 calendar days
The on-metal NFC tag with printed ID is a 29 mm adhesive tag with an NXP NTAG213 chip that works on metal surfaces and comes with a unique ID code printed on the visible face and encoded in the chip. Every unit carries a different ID, which is why it is used to inventory and track assets: machinery, tools, containers and maintenance equipment.
An ID you can read with a phone or at a glance
The printed code identifies the asset without a phone: in a list, over a call or in a photo. The same code stored in the chip lets you log it with a tap, with no typing and no transcription errors. With both on one tag, the field technician and the office always refer to the same piece of equipment.
Each NTAG213 chip also has a factory-set 7-byte UID that cannot be changed. If your maintenance software or ERP works with NFC reads, you can use it as a second reference to prevent duplicates.
Technical specifications
| Chip | NXP NTAG213 |
| Standard | NFC Forum Type 2, ISO/IEC 14443-A |
| Frequency | 13.56 MHz |
| Memory | 180 bytes total, 144 bytes of user memory |
| Factory identifier | Unique 7-byte UID |
| Personalisation | Variable ID printed and encoded, different on every tag |
| Shape and size | Round, 29 mm diameter |
| Antenna size | 27 mm |
| Use on metal | Yes, with on-metal shielding |
| Resistance | Moisture and heat |
| Write cycles | Up to 100,000 |
| Data retention | 10 years |
| Minimum order | 10 units |
| Delivery time | 20 calendar days (custom product) |
| Datasheet | Download the NTAG213 chip datasheet |
Who this numbered NFC tag is for
- Maintenance and home service companies: on boilers, meters and customer equipment to open the record of the last service visit.
- Warehouses and logistics: on metal racking, cages and containers to log locations, goods in and goods out.
- Facilities management: on electrical cabinets, lighting towers and forklifts to check manuals and maintenance schedules.
- Machinery and tool rental: to track which item goes out, who has it and when it comes back.
How to roll them out without errors
- Run a test with a few units in your real environment: type of metal, phone or reader, and position.
- Clean and degrease the surface before applying the tag so the adhesive bonds properly.
- Place it on a flat area, away from edges and contact points.
- Register each ID in your system as you fit it, so the asset is linked from day one.
Frequently asked questions
How long does the NFC tag with printed ID take to arrive?
On-metal NFC tags with printed ID are made to order, and production and delivery take 20 calendar days. If you have a rollout date, contact us before ordering.
Can I choose the numbering format?
If you need a prefix, a specific range or sequential numbering that fits your system, contact us before ordering and we will confirm the options.
Does it work stuck on metal?
Yes. The on-metal NFC tag has an insulating layer that lets it work on steel and aluminium. The read range on metal is slightly shorter than on plastic, so hold the phone over the centre of the tag.
Which phones and readers can read it?
Any NFC-enabled Android phone, iPhone XS and later without opening an app, and iPhone 7 onwards with an app such as NFC Tools. It also works with desktop USB NFC readers.
More custom printed NFC tags for metal
If you need your logo in full colour as well as an ID, the custom printed on-metal hard PVC NFC tag works the same way on metal and carries your artwork in offset print.